1. Install the driver using 32install.exe or 64install.exe. If this is not allowed, you need to disable installing unsigned feature in Window Advance Startup. Then in Device Manager, Choose Add legacy hardware, then select driver (x86 or x64)
2. Open Research Dowload tool, load firmware for W56.In Setting, under Backup, look at the bottom of dialog box, and untick NV under File Backup, then OK.
3. Press Start downloading. Now remove battery from phone, and insert it back. Without connecting the USB cable, press * and Power Button at the same time, then insert USB cable.
4. The tool should by now detects the phone, and start flashing. Remove you fingers from key once it starts. Wait until it finishes, and it is done. RESTART YOUR PHONE AND ENJOY.
pass
ReplyDeletepass
ReplyDeleteHow to Flash TWZ W56 with unlocked firmware
ReplyDeleteDOWNLOAD http://www.mediafire.com/file/nlo5ysx5tmdvmx4/TWZ_W56_SPD.rar
1. Install the driver using 32install.exe or 64install.exe. If this is not allowed, you need to disable installing unsigned feature in Window Advance Startup. Then in Device Manager, Choose Add legacy hardware, then select driver (x86 or x64)
2. Open Research Dowload tool, load firmware for W56.In Setting, under Backup, look at the bottom of dialog box, and untick NV under File Backup, then OK.
3. Press Start downloading. Now remove battery from phone, and insert it back. Without connecting the USB cable, press * and Power Button at the same time, then insert USB cable.
4. The tool should by now detects the phone, and start flashing. Remove you fingers from key once it starts. Wait until it finishes, and it is done. RESTART YOUR PHONE AND ENJOY.